Technical advantages

Comprehensive mastery of multi-stage pressing technology


Guide the advanced manufacturing level of the oil press




Dr. Oil introduced the 5th and 6th grade squeeze oil presses. The design of the pressing and pressing screw is more scientific and reasonable, the pressing process is more perfect, and many products have been certified by the Ministry of Agriculture.




技术优势


1. Increase the number of press stages: The technical expert group conducts technical research on the core components of the oil press. From the traditional oil press replacement to the fifth and sixth presses, the oil yield is higher and the productivity benefits are obvious.


技术优势


技术优势


2. Increase the diameter and length of the pressing, adjust the pitch, increase the pressure point of the pressing, and further increase the production capacity.


技术优势


3. The squeezing space will be expanded on the basis of the original model, and the crushing amount will be increased at the same time, so that the user can greatly increase the production capacity without increasing the input, and the benefits are obvious.




4. In order to prevent the extruded grease from being immersed again into the dried cake residue, an oil guiding groove is arranged in the pressing device of the device to quickly separate the oil and the cake, thereby improving the oil yield.




技术优势

'Helical gear technology' has been widely used in the aviation industry, shipbuilding industry, steel industry, automobile industry and other mechanical equipment fields, which can effectively reduce noise, avoid vibration, deformation, make parts wear-resistant, load is small, energy saving, and extend the machine Service life.



  Dr. Oil is an oil press that uses a 'helical gear' design for gearbox gears. It has the characteristics of low load and wear resistance of components, which effectively extends the service life of the oil press and saves energy.


技术优势


Running-in is an indispensable operation of the traditional oil press. It is very cumbersome, difficult to operate, and difficult to master. The reason is that the parts of the traditional oil press are processed by punching, and the rough surface of the machine has burrs that directly affect the pressing speed and Normal oil production.



In response to this defect, the company introduced advanced equipment to make the press surface of various types of oil press parts one time, and automatic precision polishing, which improved the processing precision and smoothness of the press system, plus each oil press of our company. The machine must be tested before leaving the factory. After the user purchases the machine, it can be put into normal production as long as it is simply tested.



技术优势